報告人：Prof. Grant Ingram
Speaker: Prof. Grant Ingram
主持人：王丁喜教授
Host: Prof. Dingxi Wang
授課校區：長安校區
Fundamentals of Turbomachinery（葉輪機械基礎）
1. Velocity Vectors and Turbomachinery Classification（14:00-14:45, 16th Oct）
速度向量和葉輪機械分類（ 教西C107）
2. Conservation of Mass and Momentum applied to Turbomachinery (15:00-15:45,16th Oct)
質量和動量守恒在葉輪機械中的應用（ 教西C107）
3. Energy and Efficiency (16:00-16:45, 16th Oct)
能量和效率（ 教西C107）
4. Dimensionless Parameters for Turbomachinery (17:00-17:45,16th Oct)
葉輪機械中的無量綱參數（ 教西C107）
5. Worked Examples and Applications (14:00-14:45, 17th Oct)
范例和應用（ 教西C205）
Turbomachinery Aerodynamics（葉輪機械氣體動力學）
1. Design of Compressor Cascades and Stages (15:00-15:45, 17th Oct)
壓氣機葉柵和級設計（ 教西C205）
2. Design of Turbine Cascades and Stages (16:00-16:45, 17th Oct)
渦輪葉柵和級設計（ 教西C205）
3. Design of a Modern Turbines (17:00-17:45, 17th Oct)
現代渦輪設計（ 教西C205）
4. 3D Blade Design (08:30 – 09:15, 18h Oct)
三維葉片設計（ 教西C313）
5. Loss Mechanisms in Turbomachines (09:30 – 10:15, 18th Oct)
葉輪機中的損失機理（ 教西C313）
Secondary Flows and Leakage Flows（二次流和泄露流）
1. Introduction to Secondary and Leakage Flows (10:30-11:15, 18th Oct)
二次流和泄露流簡介（ 教西C313）
2. Profiled Endwalls Case Study (11:30-12:15, 18th Oct)
端壁造型范例分析（ 教西C313）
3. Blade Lean Case Study (16:00-16:45, 19th Oct)
葉片彎曲造型范例分析（ 教西C213）
4. Aerostatic Seals Case Study (17:00-17:45, 19th Oct)
氣封范例分析（ 教西C213）
5. Recent work on Entropy Generation Rate (19:00-19:45, 19th Oct)
熵增率最新研究（ 教西C213）
Experimental Methods（實驗方法）
1. Comparison of Physical and Numerical Modelling (20:00-20:45, 19th Oct)
物理和數值模擬比較（ 教西C213）
2. Techniques for Aerodynamic Measurement (8:30-9:15, 20th Oct)
氣動測量技術（ 教西C21 5）
(1). Pressure Probes（壓力探針）
(2). Hot Films（熱線儀）
(3). Laser Measurement（激光測量）
(4). Surface Flow Visualisation（物面流動可視化）
3. Durham University Measurement Capability and Methods (9:30-10:15, 20th Oct)
杜倫大學葉輪機氣動測量能力和方法（ 教西C215）
(1). Facility Setup and Design（設施建立和設計）
(2). Instrumentation Operation and Accuracy（儀器運行和精度）
4. Recent developments in instrumentation (10:30-11:15, 20th Oct)
葉輪機氣動測量?jī)x器研發進展（ 教西C215）
5. University and Company Experimental Facilities Worldwide (11:30-12:15, 20th Oct)
世界各地大學和企業實驗設施（ 教西C215）
報告人簡介
Grant Ingram博士是英國杜倫大學的副教授，英國工程師協會注冊工程師。他的研究方向?yàn)槿~輪機械氣體動力學，關注如何從流體力學的角度出發，提高葉輪機械的效率，使得新能源和可再生能源技術更好地得以應用。他發表了約50篇學術論文，出版了一本專著。他的教學內容主要涵蓋流體力學和熱力學，講課的規模小到一對一的本科畢設，大到150人左右的大課。他也組織和講授過針對工業界的短期培訓課程，比如“汽輪機技術課程”。
Speaker’s Biography
Dr. Grant Ingram is an associate professor at University of Durham, UK, an Chartered Engineer of the Institution of Mechanical Engineers. His research focuses on making turbomachinery more efficient and making new and renewable technologies work better - both of which are approached from a fluid mechanics background. He has produced around fifty papers and one book either on my own or with co-authors. His teaching covers fluid mechanics and thermodynamics, ranging from lectures with up to 150 students to one-to-one supervisions with final year project students. He has also organized and taught on a number of short courses for Industry, most notably the “Steam Turbine Technology Course”.
