全校師生：
我校定于2017年4月28日舉辦研究生靈犀學術殿堂——黃為民報告會，現將有關事項通知如下：
1.報告會簡介
報告人：黃為民教授
時間：2017年4月28日（星期五）下午14：30
地點：友誼校區航空樓A706
主題：Programmed motion generation via the advanced shape memory technology
內容簡介：
The shape memory effect (SME) is meant for the recovery of a material back to its original shape, but only at the presence of a right stimulus, such as heat, light and chemical (e.g., water). The advanced shape memory technology aims to achieve the required motion generation/actuation of a particular application based on the SME of an existing shape memory material (SMM) or a customized one.
In this talk, the basic concept of advanced shape memory technology is briefly introduced, together with the major mechanisms to enable the SME in materials. After that, a series of examples will be presented to reveal the feasibility of utilizing the advanced shape memory technology to realized programmed motion generation in a fully autonomous manner in some typical applications, such as active assembly/dis-assembly, 4D printing, and occlusion of blood vessel.
2.歡迎各學院師生前來聽報告。報告會期間請關閉手機或?qū)⑹謾C(jī)調至靜音模式。
黨委研究生工作部
航空學院
2017年4月25日
報告人簡介
Prof Wei Min Huang obtained his PhD from Cambridge University, UK in 1998 and then joined the School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore. He has beenan Associate Professor (tenured) at this university since 2006.His research interest is on various shape memory materials and technologies. He has published over 180 journal papers and two books, (Thin film shape memory alloys: fundamentals and device applications, Cambridge University press, 2009) and (Polyurethane shape memory polymers, CRC, 2011). He is currently on the editorial board of over a dozen of journals
